MeeGo 1.1 Development Release(1.0.90.1.20100831.1) for N900 status

As you know, MeeGo 1.1 Development Release(Nightly build) has been released. I saved some log files on my N900 when it was booted by microSD.

I used in the following files.
meego-handset-armv7l-n900-nokia-proprietary-1.0.90.1.20100831.1-mmcblk0p.raw.bz2
meego-handset-armv7l-n900-nokia-proprietary-1.0.90.1.20100831.1-vmlinuz-2.6.35.3-5.2-n900

You can get this image from http://tablets-dev.nokia.com/meego-codedrop.php on which you need your N900 product ID.

BTW, N900 image can display the Handset UX. Also rotation can be worked.








dmesg
[    0.000000] Linux version 2.6.35.3-5.2-n900 ([email protected]) (gcc version 4.5.0 20100414 (MeeGo 4.5.0-1) (GCC) ) #1 PREEMPT Wed Aug 25 20:14:23 UTC 2010
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Nokia RX-51 board
[    0.000000] Ignoring unrecognised tag 0x414f4d50
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c03e68c0, node_mem_map c0913000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 16404480 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: init=/sbin/preinit root=/dev/mmcblk0p1 rootwait console=tty0 console=ttyS2,115200n8 omapfb.vram=0:2M,1:2M,2:2M mtdoops.mtddev=2 nosplash
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 128MB 128MB = 256MB total
[    0.000000] Memory: 228440k/228440k available, 33704k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc002b000   ( 140 kB)
[    0.000000]       .text : 0xc002b000 - 0xc038d000   (3464 kB)
[    0.000000]       .data : 0xc03a8000 - 0xc03e6f60   ( 252 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU lockdep checking is enabled.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
[    0.000000] omap_hwmod: l3_hwmod: cannot be enabled (3)
[    0.000000] omap_hwmod: l4_core_hwmod: cannot be enabled (3)
[    0.000000] omap_hwmod: l4_per_hwmod: cannot be enabled (3)
[    0.000000] omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.000000] Calibrating delay loop... 498.87 BogoMIPS (lpj=1945600)
[    0.000000] pid_max: default: 32768 minimum: 301
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] mux: Setting signal i2c2_scl.i2c2_scl 0x0100 -> 0x0100
[    0.000000] mux: Setting signal i2c2_sda.i2c2_sda 0x0100 -> 0x0100
[    0.000000] mux: Setting signal i2c3_scl.i2c3_scl 0x0100 -> 0x0100
[    0.000000] mux: Setting signal i2c3_sda.i2c3_sda 0x0100 -> 0x0100
[    0.000000] mux: Setting signal gpmc_ncs3.gpio54 0x410c -> 0x010c
[    0.000000] mux: Setting signal dss_data16.gpio86 0x0004 -> 0x0004
[    0.000000] mux: Setting signal uart3_rts_sd.gpio164 0x0004 -> 0x0004
[    0.000000] mux: Setting signal mcbsp_clks.gpio160 0x4104 -> 0x011c
[    0.000000] mux: Setting signal sdmmc1_clk.sdmmc1_clk 0x0000 -> 0x0118
[    0.000000] mux: Setting signal sdmmc1_cmd.sdmmc1_cmd 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc1_dat0.sdmmc1_dat0 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc1_dat1.sdmmc1_dat1 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc1_dat2.sdmmc1_dat2 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc1_dat3.sdmmc1_dat3 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_clk.sdmmc2_clk 0x0100 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_cmd.sdmmc2_cmd 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat0.sdmmc2_dat0 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat1.sdmmc2_dat1 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat2.sdmmc2_dat2 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat3.sdmmc2_dat3 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat4.sdmmc2_dat4 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat5.sdmmc2_dat5 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat6.sdmmc2_dat6 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdmmc2_dat7.sdmmc2_dat7 0x0118 -> 0x0118
[    0.000000] mux: Setting signal sdrc_cke0.sdrc_cke0 0x0118 -> 0x0000
[    0.000000] mux: Setting signal sdrc_cke1.sdrc_cke1 0x0118 -> 0x0000
[    0.001037] OMAP DMA hardware revision 4.0
[    0.001373] Reserving DMA channels 0 and 1 for HS ROM code
[    0.005798] mux: Setting signal dss_data20.gpio90 0x0014 -> 0x0004
[    0.050781] bio: create slab at 0
[    0.071105] usbcore: registered new interface driver usbfs
[    0.072845] usbcore: registered new interface driver hub
[    0.074066] usbcore: registered new device driver usb
[    0.076507] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2200 kHz
[    0.088531] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.088714] twl4030: power (irq 373) chaining IRQs 376..383
[    0.091430] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.102020] regulator: VUSB1V5: 1500 mV normal standby
[    0.104736] regulator: VUSB1V8: 1800 mV normal standby
[    0.107604] regulator: VUSB3V1: 3100 mV normal standby
[    0.119171] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.125091] regulator: VIO: 1800 mV normal standby
[    0.127929] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[    0.130615] regulator: VDAC: 1800 mV normal standby
[    0.133605] regulator: VCSI: 1800 mV normal standby
[    0.136383] regulator: V28_A: 2800 <--> 3000 mV at 2600 mV normal standby
[    0.139343] regulator: VMMC2_IO_18: 1800 mV normal standby
[    0.142272] regulator: V28: 2800 mV normal standby
[    0.145172] regulator: VMMC2_30: 2800 <--> 3000 mV at 2800 mV normal standby
[    0.148284] regulator: VCAM_ANA_28: 2800 mV normal standby
[    0.149047] i2c_omap i2c_omap.2: bus 2 rev3.12 at 100 kHz
[    0.169097] i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
[    0.175811] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.183349] Switching to clocksource 32k_counter
[    0.194549] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[    0.194976] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.195007] musb_hdrc: MHDRC RTL version 1.400
[    0.195037] musb_hdrc: setup fifo_mode 4
[    0.195068] musb_hdrc: 28/31 max ep, 16384/16384 memory
[    0.195892] musb_hdrc musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
[    0.197631] NET: Registered protocol family 2
[    0.198699] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.202056] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.202758] TCP bind hash table entries: 8192 (order: 6, 262144 bytes)
[    0.208343] TCP: Hash tables configured (established 8192 bind 8192)
[    0.208496] TCP reno registered
[    0.208557] UDP hash table entries: 128 (order: 1, 10240 bytes)
[    0.209747] UDP-Lite hash table entries: 128 (order: 1, 10240 bytes)
[    0.211914] NET: Registered protocol family 1
[    0.216583] dspbridge_init: 600000 bytes @ 81b00000
[    0.226165] msgmni has been set to 446
[    0.238189] alg: No test for stdrng (krng)
[    0.238830] io scheduler noop registered
[    0.239074] io scheduler cfq registered (default)
[    0.301055] OMAP DSS rev 2.0
[    0.301422] OMAP DISPC rev 3.0
[    0.481567] acx565akm spi1.2: omapfb: acx565akm rev 8d LCD detected
[    0.554748] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.586242] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[    0.609619] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[    0.632354] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[    1.251098] console [ttyS2] enabled
[    1.300323] brd: module loaded
[    1.313323] OneNAND driver initializing
[    1.318420] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d08c0000
[    1.328216] OneNAND Manufacturer: Samsung (0xec)
[    1.328247] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
[    1.333129] OneNAND version = 0x0121
[    1.336761] Chip support all block unlock
[    1.336761] Chip has 2 plane
[    1.338531] Scanning device for bad blocks
[    1.515075] Creating 6 MTD partitions on "omap2-onenand":
[    1.520629] 0x000000000000-0x000000020000 : "bootloader"
[    1.535552] 0x000000020000-0x000000080000 : "config"
[    1.546905] 0x000000080000-0x0000000c0000 : "log"
[    1.557189] mtdoops: ready 15, 16 (no erase)
[    1.557220] mtdoops: Attached to MTD device 2
[    1.565643] 0x0000000c0000-0x0000002c0000 : "kernel"
[    1.577270] 0x0000002c0000-0x0000004c0000 : "initfs"
[    1.588836] 0x0000004c0000-0x000010000000 : "rootfs"
[    1.617889] usbcore: registered new interface driver libusual
[    1.626220] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input0
[    1.642181] TSC2005 driver initializing
[    1.648406] input: TSC2005 touchscreen as /devices/virtual/input/input1
[    1.659240] i2c /dev entries driver
[    1.671539] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.679107] twl4030_wdt twl4030_wdt: Failed to register misc device
[    1.685791] twl4030_wdt: probe of twl4030_wdt failed with error -16
[    1.723480] No device for DAI tlv320aic3x
[    1.732208] No device for DAI omap-mcbsp-dai-0
[    1.736724] No device for DAI omap-mcbsp-dai-1
[    1.741363] No device for DAI omap-mcbsp-dai-2
[    1.745880] No device for DAI omap-mcbsp-dai-3
[    1.750427] No device for DAI omap-mcbsp-dai-4
[    1.760620] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
[    1.979095] input: RX-51 AV Jack as /devices/platform/soc-audio/sound/card0/input2
[    2.001312] ALSA device list:
[    2.004577]   #0: RX-51 (tlv320aic3x)
[    2.008575] TCP cubic registered
[    2.011932] Initializing XFRM netlink socket
[    2.016601] NET: Registered protocol family 17
[    2.021667] NET: Registered protocol family 35
[    2.039703] Power Management for TI OMAP3.
[    2.101135] Disabling unused clock "gpt2_ick"
[    2.101196] Disabling unused clock "gpt3_ick"
[    2.101226] Disabling unused clock "gpt4_ick"
[    2.101257] Disabling unused clock "gpt5_ick"
[    2.101257] Disabling unused clock "gpt6_ick"
[    2.101287] Disabling unused clock "gpt7_ick"
[    2.101318] Disabling unused clock "gpt8_ick"
[    2.101348] Disabling unused clock "gpt9_ick"
[    2.101379] Disabling unused clock "gpio2_dbck"
[    2.101409] Disabling unused clock "gpio3_dbck"
[    2.101409] Disabling unused clock "gpio4_dbck"
[    2.101440] Disabling unused clock "gpio5_dbck"
[    2.101470] Disabling unused clock "gpio6_dbck"
[    2.101501] Disabling unused clock "gpt9_fck"
[    2.101531] Disabling unused clock "gpt8_fck"
[    2.101531] Disabling unused clock "gpt7_fck"
[    2.101562] Disabling unused clock "gpt6_fck"
[    2.101593] Disabling unused clock "gpt5_fck"
[    2.101623] Disabling unused clock "gpt4_fck"
[    2.101623] Disabling unused clock "gpt3_fck"
[    2.101654] Disabling unused clock "gpt2_fck"
[    2.101684] Disabling unused clock "gpio1_dbck"
[    2.101745] Disabling unused clock "rng_ick"
[    2.101776] Disabling unused clock "ssi_ick"
[    2.101806] Disabling unused clock "gpt10_ick"
[    2.101837] Disabling unused clock "gpt11_ick"
[    2.101898] Disabling unused clock "usbtll_ick"
[    2.101928] Disabling unused clock "ssi_ssr_fck"
[    2.101989] Disabling unused clock "usbtll_fck"
[    2.102050] Disabling unused clock "ts_fck"
[    2.102050] Disabling unused clock "cpefuse_fck"
[    2.102081] Disabling unused clock "gpt11_fck"
[    2.102111] Disabling unused clock "gpt10_fck"
[    2.102142] Disabling unused clock "dpll4_m6x2_ck"
[    2.102172] Disabling unused clock "dpll4_m5x2_ck"
[    2.102203] Disabling unused clock "dpll3_m3x2_ck"
[    2.102233] Disabling unused clock "sys_clkout1"
[    2.102264] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    2.176513] Console: switching to colour frame buffer device 100x30
[    2.255798] regulator_init_complete: incomplete constraints, leaving VCSI on
[    2.279571] Waiting for root device /dev/mmcblk0p1...
[    2.347930] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.359954] mmc0: new SD card at address aaaa
[    2.370880] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
[    2.380676]  mmcblk0: p1 p2
[    2.512054] EXT3-fs: barriers not enabled
[    2.521667] kjournald starting.  Commit interval 5 seconds
[    2.532440] EXT3-fs (mmcblk0p1): using internal journal
[    2.541259] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
[    2.552001] VFS: Mounted root (ext3 filesystem) on device 179:1.
[    2.561279] Freeing init memory: 140K
[    2.573059] Failed to execute /sbin/preinit.  Attempting defaults...
[    2.627838] mmc1: new high speed MMC card at address 0001
[    2.640319] mmcblk1: mmc1:0001 MMC32G 29.8 GiB
[    2.651306]  mmcblk1: p1 p2 p3
[    4.405548] udev: starting version 161
[    5.783050] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[    6.047698] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input4
[    6.603454] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    6.980957] industrialio: module is from the staging directory, the quality is unknown, you have been warned.
[    7.106323] tsl2563: module is from the staging directory, the quality is unknown, you have been warned.
[    7.138153] tsl2563 2-0029: model 7, rev. 0
[    7.594268] lp5523 2-0032: LP5523 Programmable led chip found
[    7.883605] lis3lv02d: 8 bits sensor found
[    7.890808] isp1704_charger isp1704_charger.0: registered with product id isp1707
[    7.944427] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
[    8.606140] i2c_omap i2c_omap.2: controller timed out
[    8.689331] lp5523 2-0032: got interrupt from led chip
[    8.691955] lp5523 2-0032: interrupt from led chip 4f
[    8.691986] lp5523 2-0032: all engines configured
[    8.692169] lp5523 2-0032: disabling engines
[    9.179901] Registered led device: lp5523:kb1
[    9.180541] Registered led device: lp5523:kb2
[    9.181091] Registered led device: lp5523:kb3
[    9.181732] Registered led device: lp5523:kb4
[    9.182250] Registered led device: lp5523:b
[    9.182739] Registered led device: lp5523:g
[    9.188629] OMAP SSI hw driver loaded
[    9.265808] Registered led device: lp5523:r
[    9.266906] Registered led device: lp5523:kb5
[    9.267730] Registered led device: lp5523:kb6
[   10.135986] cfg80211: Calling CRDA to update world regulatory domain
[   10.149566] HSI/SSI char device loaded
[   10.152038] CMT driver
[   10.222198] SSI protocol aka McSAAB added
[   10.796142] phy0: Selected rate control algorithm 'pid'
[   10.839599] wl1251: loaded
[   10.859100] wl1251: initialized
[   11.523895] smc91x: not found (-19).
[   11.877532] Adding 249980k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:249980k SS
[   11.895050] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[   11.895477] wl1251: firmware booted (Rev 4.0.4.3.7)
[   12.000274] g_nokia gadget: using random self ethernet address
[   12.000335] g_nokia gadget: using random host ethernet address
[   12.013183] usb0: MAC 46:db:32:b3:75:b9
[   12.013214] usb0: HOST MAC 06:66:2b:f3:f2:26
[   12.013366] g_nokia gadget: USB CDC Phonet function
[   12.013397] g_nokia gadget: using musb_hdrc, OUT ep1out, IN ep1in
[   12.014099] g_nokia gadget: USB CDC Phonet function
[   12.014129] g_nokia gadget: using musb_hdrc, OUT ep1out, IN ep1in
[   12.014282] g_nokia gadget: N900 (PC-Suite Mode)
[   12.014343] g_nokia gadget: g_nokia ready
[   17.653320] Bluetooth: Core ver 2.15
[   17.657714] NET: Registered protocol family 31
[   17.657745] Bluetooth: HCI device and connection manager initialized
[   17.658477] Bluetooth: HCI socket layer initialized
[   17.841583] Bluetooth: L2CAP ver 2.14
[   17.841613] Bluetooth: L2CAP socket layer initialized
[   17.988830] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.988861] Bluetooth: BNEP filters: protocol multicast
[   18.293762] Bluetooth: SCO (Voice Link) ver 0.6
[   18.293792] Bluetooth: SCO socket layer initialized
[   19.747344] g_nokia gadget: high speed config #1: Bus Powered
[  260.636901] i2c_omap i2c_omap.1: controller timed out
[  260.636962] twl: i2c_read failed to transfer all messages
 

ifconfig -a
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:320 errors:0 dropped:0 overruns:0 frame:0
          TX packets:320 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:20339 (19.8 KiB)  TX bytes:20339 (19.8 KiB)

phonet0   Link encap:UNSPEC  HWaddr 15-00-B0-05-02-00-AC-05-00-00-00-00-00-00-00-00 
          POINTOPOINT NOARP  MTU:4000  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

upnlink0  Link encap:UNSPEC  HWaddr 1B-00-F0-08-02-00-EC-08-00-00-00-00-00-00-00-00 
          POINTOPOINT NOARP  MTU:65541  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

usb0      Link encap:Ethernet  HWaddr 46:DB:32:B3:75:B9 
          inet addr:192.168.2.15  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2024 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1276 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:161948 (158.1 KiB)  TX bytes:167928 (163.9 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:1F:DF:E7:50:F2 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

ps auxwwf
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         2  0.0  0.0      0     0 ?        S    16:09   0:00 [kthreadd]
root         3  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [ksoftirqd/0]
root         4  0.1  0.0      0     0 ?        S    16:09   0:00  \_ [events/0]
root         5  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [khelper]
root         8  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [async/mgr]
root       121  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [sync_supers]
root       123  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [bdi-default]
root       125  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [kblockd/0]
root       131  1.7  0.0      0     0 ?        S    16:09   0:12  \_ [omap2_mcspi]
root       145  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [khubd]
root       154  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [twl4030-irqchip]
root       155  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [twl4030-irq]
root       168  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [irq/378-twl4030]
root       198  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [kmmcd]
root       225  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [kswapd0]
root       226  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [aio/0]
root       227  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [crypto/0]
root       365  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [smflush]
root       368  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [mtdblock0]
root       373  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [mtdblock1]
root       378  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [mtdblock2]
root       383  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [mtdblock3]
root       388  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [mtdblock4]
root       393  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [mtdblock5]
root       402  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [irq/369-twl4030]
root       404  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [irq/260-tsc2005]
root       445  0.2  0.0      0     0 ?        S    16:09   0:02  \_ [mmcqd]
root       450  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [kjournald]
root       452  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [mmcqd]
root       501  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [flush-179:0]
root       538  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [irq/376-twl4030]
root       580  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [irq/340-lis3lv0]
root       581  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [irq/341-lis3lv0]
root       633  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [cfg80211]
root       638  1.6  0.0      0     0 ?        S    16:09   0:11  \_ [phy0]
root       688  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [sgx_perf]
root       706  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [SGXOSTimer/0]
root       707  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [sgx_misr]
root       778  0.0  0.0      0     0 ?        S    16:09   0:00  \_ [l2cap]
root       899  0.2  0.0      0     0 ?        S    16:10   0:01  \_ [ipolldevd]
root         1  0.2  0.2   1812   524 ?        Ss   16:09   0:01 init [5]          
root       485  0.0  0.2   2104   656 ?        S
root       772  0.0  0.2   2100   680 ?        S<   16:09   0:00  \_ /sbin/udevd -d
root       773  0.0  0.2   2100   680 ?        S<   16:09   0:00  \_ /sbin/udevd -d
dbus       546  0.1  0.5   2720  1200 ?        Ss   16:09   0:00 dbus-daemon --system --fork
root       563  0.0  0.8   4048  1840 ?        Ss   16:09   0:00 /usr/sbin/connmand -W nl80211,wext
root       568  0.0  0.9   5384  2200 ?        S    16:09   0:00 /sbin/wpa_supplicant -u
root       572  0.0  0.2   1892   628 ?        SNs  16:09   0:00 /sbin/syslogd -m 0
root       576  0.0  0.7   1724  1692 ?        S
root       603  0.0  0.6  13620  1520 ?        S
root       665  0.0  0.1   1812   452 ?        SNs  16:09   0:00 /sbin/klogd -x
root       679  0.0  0.3   2792   820 ?        S    16:09   0:00 /bin/sh /etc/rc5.d/S50sensord start
root       681  0.0  0.5   2784  1200 ?        S    16:09   0:00  \_ /bin/bash -c ulimit -S -c 0 >/dev/null 2>&1 ; /usr/sbin/sensord
root       684  0.1  2.3  46896  5364 ?        Sl   16:09   0:00      \_ /usr/sbin/sensord
avahi      705  0.0  0.6   3012  1488 ?        S    16:09   0:00 avahi-daemon: running [linux.local]
avahi      723  0.0  0.2   3012   516 ?        Ss   16:09   0:00  \_ avahi-daemon: chroot helper
root       711  0.6  0.5   3940  1208 ?        SL   16:09   0:04 /usr/sbin/bme_RX-51
root       726  0.0  0.5   5960  1156 ?        Ss   16:09   0:00 /usr/sbin/sshd
root      1149  0.5  1.2   9400  2888 ?        Ss   16:20   0:00  \_ sshd: [email protected]/0
root      1153  0.3  0.7   5824  1740 pts/0    Ss   16:20   0:00      \_ -bash
root      1179  1.2  0.5   4788  1368 pts/0    S+   16:20   0:00          \_ /bin/bash /usr/sbin/mcinfo
root      1336  0.0  0.3   2532   908 pts/0    R+   16:21   0:00              \_ ps auxwwwf
root       732  0.0  0.2   1800   508 tty1     Ss+  16:09   0:00 /sbin/mingetty --noclear tty1
meego      733  0.0  0.9   5288  2224 ?        Ss   16:09   0:00 uxlaunch
root       737  0.0  0.1   3640   320 ?        S    16:09   0:00  \_ uxlaunch
root       761  0.8 11.4  30108 26204 tty2     Ss+  16:09   0:05  \_ /usr/bin/Xorg :0 -nolisten tcp -dpi 120 -noreset -auth /var/run/uxlaunch/Xauth-meego-JOBiFB vt2
meego      860  0.4 10.7  42280 24592 ?        Sl   16:09   0:02  \_ /usr/bin/mcompositor
meego      886  0.6  5.3  31064 12220 ?        S    16:09   0:04  \_ /usr/bin/mthemedaemon
meego      887  0.4  8.3  67576 19172 ?        Sl   16:09   0:03  \_ /usr/bin/mdecorator -software -remote-theme
meego      888  0.8 14.9  73344 34220 ?        Sl   16:09   0:05  \_ /usr/bin/meego-im-uiserver -remote-theme
meego      890  1.4 18.9 185912 43212 ?        Sl   16:09   0:09  \_ /usr/bin/sysuid -remote-theme
meego      891  1.7 16.9 119768 38784 ?        SNl  16:09   0:12  \_ /usr/bin/duihome --desktop -remote-theme
meego      896  0.0  1.4  44484  3224 ?        SN   16:09   0:00  \_ /usr/libexec/tracker-miner-fs
root       734  0.0  0.2   1812   552 ttyS2    Ss+  16:09   0:00 /sbin/agetty -L 115200 ttyS2 vt100
root       763  0.0  0.9   4552  2212 ?        Ss   16:09   0:00 /usr/sbin/ofonod
root       765  0.0  0.6   3876  1472 ?        Ss   16:09   0:00 /usr/sbin/bluetoothd
root       767  0.0  0.3   2008   780 ?        Ss   16:09   0:00 /usr/sbin/xinetd -stayalive
meego      784  0.0  0.2   4864   680 ?        Ss   16:09   0:00 /usr/bin/ssh-agent
root       786  0.0  1.2  19788  2840 ?        Sl   16:09   0:00 /usr/sbin/console-kit-daemon --no-daemon
meego      854  0.1  0.4   2824  1000 ?        Ss   16:09   0:01 dbus-daemon --fork --session --print-pid 9 --print-address 11
meego      857  0.0  0.7   6256  1752 ?        S    16:09   0:00 /usr/libexec/gconfd-2
meego      905  0.8  3.3  26336  7732 ?        SN   16:10   0:05 phonesim -p 12345 /usr/share/phonesim/default.xml
meego      935  0.5  3.7  23432  8636 ?        Sl   16:11   0:03 /usr/libexec/tracker-store
meego      938  0.0  1.2  25644  2828 ?        Sl   16:11   0:00 /usr/libexec/tumblerd


/var/log/Xorg.0.log
[    16.838]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    16.839] X Protocol Version 11, Revision 0
[    16.839] Build Operating System: Linux 2.6.31.12-0.2-desktop armv7l
[    16.840] Current Operating System: Linux localhost.localdomain 2.6.35.3-5.2-n900 #1 PREEMPT Wed Aug 25 20:14:23 UTC 2010 armv7l
[    16.840] Kernel command line: init=/sbin/preinit root=/dev/mmcblk0p1 rootwait console=tty0 console=ttyS2,115200n8 omapfb.vram=0:2M,1:2M,2:2M mtdoops.mtddev=2 nosplash
[    16.841] Build Date: 30 August 2010  05:11:59PM
[    16.841] Build ID: xorg-x11-server 1.9.0-1.13
[    16.842] Current version of pixman: 0.18.2
[    16.842]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    16.842] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.877] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan  1 16:09:56 2009
[    16.918] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.932] (==) No Layout section.  Using the first Screen section.
[    16.933] (==) No screen section available. Using defaults.
[    16.933] (**) |-->Screen "Default Screen Section" (0)
[    16.933] (**) |   |-->Monitor ""
[    16.934] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    16.935] (**) Option "AllowEmptyInput" "False"
[    16.935] (==) Automatically adding devices
[    16.936] (==) Automatically enabling devices
[    16.945] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    16.946] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.946] (==) |-->Input Device ""
[    16.946] (==) |-->Input Device ""
[    16.946] (==) No Layout section. Using the default mouse configuration.
[    16.946] (==) No Layout section. Using the default keyboard configuration.
[    16.947] (II) Loader magic: 0x19b90c
[    16.947] (II) Module ABI versions:
[    16.947]     X.Org ANSI C Emulation: 0.4
[    16.947]     X.Org Video Driver: 8.0
[    16.947]     X.Org XInput driver : 11.0
[    16.947]     X.Org Server Extension : 4.0
[    16.948] (II) LoadModule: "extmod"
[    16.952] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    17.004] (II) Module extmod: vendor="X.Org Foundation"
[    17.004]     compiled for 1.9.0, module version = 1.0.0
[    17.005]     Module class: X.Org Server Extension
[    17.005]     ABI class: X.Org Server Extension, version 4.0
[    17.005] (II) Loading extension MIT-SCREEN-SAVER
[    17.005] (II) Loading extension XFree86-VidModeExtension
[    17.005] (II) Loading extension XFree86-DGA
[    17.005] (II) Loading extension DPMS
[    17.006] (II) Loading extension XVideo
[    17.006] (II) Loading extension XVideo-MotionCompensation
[    17.006] (II) Loading extension X-Resource
[    17.006] (II) LoadModule: "dbe"
[    17.032] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    17.037] (II) Module dbe: vendor="X.Org Foundation"
[    17.037]     compiled for 1.9.0, module version = 1.0.0
[    17.038]     Module class: X.Org Server Extension
[    17.038]     ABI class: X.Org Server Extension, version 4.0
[    17.038] (II) Loading extension DOUBLE-BUFFER
[    17.038] (II) LoadModule: "glx"
[    17.040] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.083] (II) Module glx: vendor="X.Org Foundation"
[    17.083]     compiled for 1.9.0, module version = 1.0.0
[    17.083]     ABI class: X.Org Server Extension, version 4.0
[    17.084] (==) AIGLX enabled
[    17.084] (II) Loading extension GLX
[    17.084] (II) LoadModule: "record"
[    17.097] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    17.105] (II) Module record: vendor="X.Org Foundation"
[    17.106]     compiled for 1.9.0, module version = 1.13.0
[    17.106]     Module class: X.Org Server Extension
[    17.106]     ABI class: X.Org Server Extension, version 4.0
[    17.106] (II) Loading extension RECORD
[    17.106] (II) LoadModule: "dri"
[    17.120] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    17.138] (II) Module dri: vendor="X.Org Foundation"
[    17.138]     compiled for 1.9.0, module version = 1.0.0
[    17.139]     ABI class: X.Org Server Extension, version 4.0
[    17.139] (II) Loading extension XFree86-DRI
[    17.139] (II) LoadModule: "dri2"
[    17.157] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.165] (II) Module dri2: vendor="X.Org Foundation"
[    17.165]     compiled for 1.9.0, module version = 1.2.0
[    17.165]     ABI class: X.Org Server Extension, version 4.0
[    17.165] (II) Loading extension DRI2
[    17.166] Primary device is not PCI
[    17.166] (==) Matched fbdev as autoconfigured driver 0
[    17.166] (==) Assigned the driver to the xf86ConfigLayout
[    17.167] (II) LoadModule: "fbdev"
[    17.169] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.220] (II) Module fbdev: vendor="X.Org Foundation"
[    17.221]     compiled for 1.9.0, module version = 0.4.0
[    17.221]     ABI class: X.Org Video Driver, version 8.0
[    17.221] (II) LoadModule: "mouse"
[    17.225] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    17.240] (II) Module mouse: vendor="X.Org Foundation"
[    17.240]     compiled for 1.9.0, module version = 1.5.0
[    17.240]     Module class: X.Org XInput Driver
[    17.240]     ABI class: X.Org XInput driver, version 11.0
[    17.241] (II) LoadModule: "kbd"
[    17.260] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[    17.264] (II) Module kbd: vendor="X.Org Foundation"
[    17.265]     compiled for 1.9.0, module version = 1.4.0
[    17.265]     Module class: X.Org XInput Driver
[    17.265]     ABI class: X.Org XInput driver, version 11.0
[    17.273] (II) FBDEV: driver for framebuffer: fbdev
[    17.274] (++) using VT number 2

[    17.321] (WW) Falling back to old probe method for fbdev
[    17.321] (II) Loading sub module "fbdevhw"
[    17.322] (II) LoadModule: "fbdevhw"
[    17.324] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.329] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.329]     compiled for 1.9.0, module version = 0.0.2
[    17.330]     ABI class: X.Org Video Driver, version 8.0
[    17.330] (II) FBDEV(0): using default device
[    17.331] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    17.332] (II) FBDEV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 16/16
[    17.332] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[    17.332] (==) FBDEV(0): RGB weight 565
[    17.332] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.333] (==) FBDEV(0): Default visual is TrueColor
[    17.333] (II) FBDEV(0): hardware: omapfb (video memory: 2048kB)
[    17.334] (II) FBDEV(0): Output LCD has no monitor section
[    17.335] (II) FBDEV(0): Not using default mode "640x350" (vrefresh out of range)
[    17.363] (II) FBDEV(0): Not using default mode "320x175" (doublescan mode not supported)
[    17.363] (II) FBDEV(0): Not using default mode "640x400" (vrefresh out of range)
[    17.363] (II) FBDEV(0): Not using default mode "320x200" (doublescan mode not supported)
[    17.363] (II) FBDEV(0): Not using default mode "720x400" (vrefresh out of range)
[    17.363] (II) FBDEV(0): Not using default mode "360x200" (doublescan mode not supported)
[    17.364] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    17.364] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.364] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    17.364] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.364] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    17.365] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.365] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    17.365] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.365] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    17.365] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.366] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    17.366] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.366] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    17.366] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.366] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    17.367] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.367] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    17.383] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.383] (II) FBDEV(0): Not using default mode "1024x768i" (interlace mode not supported)
[    17.383] (II) FBDEV(0): Not using default mode "512x384i" (doublescan mode not supported)
[    17.384] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    17.384] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.384] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    17.384] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.384] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    17.384] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.385] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    17.385] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.385] (II) FBDEV(0): Not using default mode "1152x864" (height too large for virtual size)
[    17.385] (II) FBDEV(0): Not using default mode "576x432" (doublescan mode not supported)
[    17.385] (II) FBDEV(0): Not using default mode "1280x960" (height too large for virtual size)
[    17.385] (II) FBDEV(0): Not using default mode "640x480" (doublescan mode not supported)
[    17.386] (II) FBDEV(0): Not using default mode "1280x960" (height too large for virtual size)
[    17.386] (II) FBDEV(0): Not using default mode "640x480" (doublescan mode not supported)
[    17.387] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    17.388] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.388] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    17.388] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.388] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    17.388] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.389] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    17.389] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.389] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    17.389] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.389] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    17.390] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.390] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    17.390] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.390] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    17.398] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.399] (II) FBDEV(0): Not using default mode "1792x1344" (height too large for virtual size)
[    17.399] (II) FBDEV(0): Not using default mode "896x672" (doublescan mode not supported)
[    17.399] (II) FBDEV(0): Not using default mode "1792x1344" (height too large for virtual size)
[    17.399] (II) FBDEV(0): Not using default mode "896x672" (doublescan mode not supported)
[    17.399] (II) FBDEV(0): Not using default mode "1856x1392" (height too large for virtual size)
[    17.400] (II) FBDEV(0): Not using default mode "928x696" (doublescan mode not supported)
[    17.400] (II) FBDEV(0): Not using default mode "1856x1392" (height too large for virtual size)
[    17.400] (II) FBDEV(0): Not using default mode "928x696" (doublescan mode not supported)
[    17.400] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    17.400] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.401] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    17.401] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.401] (II) FBDEV(0): Not using default mode "832x624" (width too large for virtual size)
[    17.401] (II) FBDEV(0): Not using default mode "416x312" (doublescan mode not supported)
[    17.401] (II) FBDEV(0): Not using default mode "1400x1050" (height too large for virtual size)
[    17.401] (II) FBDEV(0): Not using default mode "700x525" (doublescan mode not supported)
[    17.402] (II) FBDEV(0): Not using default mode "1400x1050" (height too large for virtual size)
[    17.402] (II) FBDEV(0): Not using default mode "700x525" (doublescan mode not supported)
[    17.402] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    17.402] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.402] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    17.403] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.410] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    17.411] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.411] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    17.411] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.411] (II) FBDEV(0): Printing probed modes for output LCD
[    17.411] (II) FBDEV(0): Modeline "800x480"x57.2   24.00  800 824 828 856  480 484 487 490 -hsync -vsync -csync (28.0 kHz)
[    17.412] (II) FBDEV(0): Output LCD connected
[    17.412] (II) FBDEV(0): Using exact sizes for initial modes
[    17.412] (II) FBDEV(0): Output LCD using initial mode 800x480
[    17.412] (II) FBDEV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.413] (II) Loading sub module "fb"
[    17.413] (II) LoadModule: "fb"
[    17.431] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.464] (II) Module fb: vendor="X.Org Foundation"
[    17.464]     compiled for 1.9.0, module version = 1.0.0
[    17.466]     ABI class: X.Org ANSI C Emulation, version 0.4
[    17.468] (++) FBDEV(0): DPI set to (120, 120)
[    17.470] (II) Loading sub module "exa"
[    17.470] (II) LoadModule: "exa"
[    17.475] (II) Loading /usr/lib/xorg/modules/libexa.so
[    17.493] (II) Module exa: vendor="X.Org Foundation"
[    17.493]     compiled for 1.9.0, module version = 2.5.0
[    17.493]     ABI class: X.Org Video Driver, version 8.0
[    17.494] (II) EXA(0): Driver allocated offscreen pixmaps
[    17.494] (II) EXA(0): Driver registered support for the following operations:
[    17.494] (II)         Solid
[    17.495] (II)         Copy
[    17.563] (II) Loading sub module "dri2"
[    17.563] (II) LoadModule: "dri2"
[    17.565] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.566] (II) FBDEV(0): [DRI2] Setup complete
[    17.566] (II) FBDEV(0): [DRI2]   DRI driver: pvr2d
[    17.575] omap/sysfs: can't open '/sys/devices/platform/omapdss/display1/timings' for reading: 2:No such file or directory
[    17.576] (==) FBDEV(0): Backing store disabled
[    17.577] (II) FBDEV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.579] (--) RandR disabled
[    17.580] (II) Initializing built-in extension Generic Event Extension
[    17.580] (II) Initializing built-in extension SHAPE
[    17.580] (II) Initializing built-in extension MIT-SHM
[    17.580] (II) Initializing built-in extension XInputExtension
[    17.580] (II) Initializing built-in extension XTEST
[    17.580] (II) Initializing built-in extension BIG-REQUESTS
[    17.581] (II) Initializing built-in extension SYNC
[    17.581] (II) Initializing built-in extension XKEYBOARD
[    17.581] (II) Initializing built-in extension XC-MISC
[    17.581] (II) Initializing built-in extension XFIXES
[    17.581] (II) Initializing built-in extension RENDER
[    17.581] (II) Initializing built-in extension RANDR
[    17.582] (II) Initializing built-in extension COMPOSITE
[    17.582] (II) Initializing built-in extension DAMAGE
[    17.727] (EE) AIGLX error: dlopen of /usr/lib/dri/pvr2d_dri.so failed (/usr/lib/dri/pvr2d_dri.so: cannot open shared object file: No such file or directory)
[    17.727] (EE) AIGLX: reverting to software rendering
[    17.728] (II) AIGLX: Screen 0 is not DRI capable
[    17.728] (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[    17.728] (EE) GLX: could not load software renderer
[    17.729] (II) GLX: no usable GL providers found for screen 0
[    17.730] (EE) FBDEV(0): omap/extfb: Couldn't change update mode
[    17.731] (II) FBDEV(0): Setting screen physical size to 169 x 101
[    18.151] (II) XKB: reuse xkmfile /var/cache/xkb/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
[    18.220] (WW) : No Device specified, looking for one...
[    18.221] (EE) : Cannot find which device to use.
[    18.221] (==) : Protocol: "Auto"
[    18.221] (**) Option "CorePointer"
[    18.222] (**) : always reports core events
[    18.222] (EE) xf86OpenSerial: No Device specified.
[    18.223] (EE) : cannot open input device
[    18.224] (EE) PreInit failed for input device ""
[    18.224] (II) UnloadModule: "mouse"
[    18.225] (**) Option "CoreKeyboard"
[    18.225] (**) : always reports core events
[    18.225] (**) Option "Protocol" "standard"
[    18.225] (**) : Protocol: standard
[    18.226] (**) Option "XkbRules" "base"
[    18.228] (**) : XkbRules: "base"
[    18.229] (**) Option "XkbModel" "pc105"
[    18.229] (**) : XkbModel: "pc105"
[    18.229] (**) Option "XkbLayout" "us"
[    18.229] (**) : XkbLayout: "us"
[    18.230] (**) Option "CustomKeycodes" "off"
[    18.230] (**) : CustomKeycodes disabled
[    18.230] (II) XINPUT: Adding extended input device "" (type: KEYBOARD)
[    18.535] (II) config/udev: Adding input device gpio-keys (/dev/input/event3)
[    18.535] (**) gpio-keys: Applying InputClass "default"
[    18.536] (**) gpio-keys: Applying InputClass "Keyboard"
[    18.536] (II) LoadModule: "evdev"
[    18.540] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.544] (II) Module evdev: vendor="X.Org Foundation"
[    18.545]     compiled for 1.9.0, module version = 2.4.99
[    18.545]     Module class: X.Org XInput Driver
[    18.545]     ABI class: X.Org XInput driver, version 11.0
[    18.546] (**) gpio-keys: always reports core events
[    18.546] (**) gpio-keys: Device: "/dev/input/event3"
[    18.549] (--) gpio-keys: Found keys
[    18.549] (II) gpio-keys: Configuring as keyboard
[    18.549] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD)
[    18.549] (**) Option "xkb_rules" "evdev"
[    18.550] (**) Option "xkb_model" "nokiarx51"
[    18.550] (**) Option "xkb_layout" "us"
[    18.550] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[    18.633] (II) XKB: reuse xkmfile /var/cache/xkb/server-F02A4EC2B51D0F8ABD7F9B3C322FDA9C51547CA5.xkm
[    18.678] (II) config/udev: Adding input device twl4030_pwrbutton (/dev/input/event4)
[    18.678] (**) twl4030_pwrbutton: Applying InputClass "default"
[    18.679] (**) twl4030_pwrbutton: always reports core events
[    18.679] (**) twl4030_pwrbutton: Device: "/dev/input/event4"
[    18.680] (--) twl4030_pwrbutton: Found keys
[    18.680] (II) twl4030_pwrbutton: Configuring as keyboard
[    18.680] (II) XINPUT: Adding extended input device "twl4030_pwrbutton" (type: KEYBOARD)
[    18.680] (**) Option "xkb_rules" "evdev"
[    18.681] (**) Option "xkb_model" "evdev"
[    18.682] (**) Option "xkb_layout" "us"
[    18.725] (II) XKB: reuse xkmfile /var/cache/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[    18.751] (II) config/udev: Adding input device TWL4030 Keypad (/dev/input/event0)
[    18.751] (**) TWL4030 Keypad: Applying InputClass "default"
[    18.751] (**) TWL4030 Keypad: always reports core events
[    18.752] (**) TWL4030 Keypad: Device: "/dev/input/event0"
[    18.752] (--) TWL4030 Keypad: Found keys
[    18.752] (II) TWL4030 Keypad: Configuring as keyboard
[    18.753] (II) XINPUT: Adding extended input device "TWL4030 Keypad" (type: KEYBOARD)
[    18.753] (**) Option "xkb_rules" "evdev"
[    18.753] (**) Option "xkb_model" "evdev"
[    18.754] (**) Option "xkb_layout" "us"
[    18.815] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    18.815] (**) ST LIS3LV02DL Accelerometer: Ignoring device from InputClass "disable accelerometer"
[    18.941] (II) config/udev: Adding input device RX-51 AV Jack (/dev/input/event2)
[    18.941] (**) RX-51 AV Jack: Applying InputClass "default"
[    18.942] (**) RX-51 AV Jack: always reports core events
[    18.942] (**) RX-51 AV Jack: Device: "/dev/input/event2"
[    18.943] (WW) RX-51 AV Jack: Don't know how to use device
[    18.943] (II) UnloadModule: "evdev"
[    18.943] (EE) PreInit returned NULL for "RX-51 AV Jack"
[    19.034] (II) config/udev: Adding input device TSC2005 touchscreen (/dev/input/event1)
[    19.034] (**) TSC2005 touchscreen: Applying InputClass "default"
[    19.034] (**) TSC2005 touchscreen: Applying InputClass "Touchscreen"
[    19.035] (**) TSC2005 touchscreen: always reports core events
[    19.035] (**) TSC2005 touchscreen: Device: "/dev/input/event1"
[    19.036] (--) TSC2005 touchscreen: Found absolute axes
[    19.036] (--) TSC2005 touchscreen: Found x and y absolute axes
[    19.036] (--) TSC2005 touchscreen: Found absolute touchscreen
[    19.036] (II) TSC2005 touchscreen: Configuring as touchscreen
[    19.037] (**) TSC2005 touchscreen: YAxisMapping: buttons 4 and 5
[    19.037] (**) TSC2005 touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.037] (II) XINPUT: Adding extended input device "TSC2005 touchscreen" (type: TOUCHSCREEN)
[    19.038] (II) TSC2005 touchscreen: initialized for absolute axes.
[    23.342] (II) XKB: reuse xkmfile /var/cache/xkb/server-F02A4EC2B51D0F8ABD7F9B3C322FDA9C51547CA5.xkm

Comments

Popular posts from this blog

MeeGo 1.1 for NexusOne status part2 and how to work(Using microSD and No fastboot! You can also dualboot both of MeeGo and Android).

MeeGo 1.0 for N900 status