Updated on 20101107(kernel build, kickstart file, dialer screenshot, fdisk /dev/mmcblk0) Part2. Single boot: http://blog.mitsutaka.org/2010/11/meego-11-for-nexusone-status-part2-and.html As you know, MeeGo could be worked on the NexusOne. It was v1.1 development release that time. Then I tried if MeeGo 1.1 final release could work on it. Of course, It could be work. and We've made it more responsive to running. 1. Linux kernel zImage is loaded from PC via fastboot command. It uses the Android kernel for MSM. This tree is tagged "android-msm-2.6.29-nexusone". We can use it. android-msm-2.6.32, android-msm-2.6.35 branches could be worked. Here is case of android-msm-2.6.32 $ git clone git://android.git.kernel.org/kernel/msm.git -b android-msm-2.6.32 android-msm-2.6.32 $ cd android-msm-2.6.32 Then We use a mahimahi_defconfig using as the base kernel configuration. $ cp arch/arm/configs/mahimahi_defconfig .config And customize it. When it boots via
あそこの道は巡航速度 200kmだった様な・・・
ReplyDeleteでも赤色灯に捕まらなければの話だけど。
確かに出せますね。でもそこそこ車が多かったので140kmで精一杯でした
ReplyDelete